Heat pumps

Heat pumps for your home, designed around how you live

Efficient air source heat pumps from trusted manufacturers, MCS-certified installation, up to £9,000 off through the Boiler Upgrade Scheme for eligible homes and 0% VAT on residential systems.

5.0
Reviews on Google

Air & ground source heat pump installations across Cambridgeshire

We install complete heat pump systems for homes and businesses across Cambridge and the wider Cambridgeshire area. As MCS-certified installers, we’ll guide you through every step, from choosing the right system for your property to accessing relevant grants and incentives, including the Boiler Upgrade Scheme.

  • Design to handover

    Survey, system design, planning, installation and commissioning by one team.

  • 500+ installed

    Air and ground source heat pumps fitted across Cambridgeshire over 20 years.

  • Grants and schemes

    MCS-certified, so you can claim the Boiler Upgrade Scheme and reward schemes.

  • Warranty and no VAT

    5 to 7 year product warranty and 0% VAT on residential installations.

Heat pump installation

The Infinite Installation Process

From your first assessment and heat loss survey through to installation, commissioning and aftercare, our local team stays with you at every step.

  1. Step 01

    Initial Enquiry

    Get in touch to discuss your property and ask any questions. We’ll provide honest advice and help determine whether a heat pump is right for your home.

  2. Step 02

    Free Desktop Estimate

    Using your floor plans or property information, we’ll prepare a no-obligation estimate outlining the proposed system, equipment and indicative installation costs.

  3. Step 03

    Detailed Home Survey

    If you’d like to proceed, we’ll carry out a full heat loss survey and site consultation to confirm suitability and system design.
    Survey Fee: 5% of the estimated installation value. If the property is found to be unsuitable for a heat pump installation, the survey fee is fully refundable.

  4. Step 04

    Design & Approval

    We’ll produce your final design, confirm system sizing and agree an installation schedule. Any required DNO notifications or applications will be submitted on your behalf.

  5. Step 05

    Installation

    Our team completes all heating, hot water and electrical works required, including installation of the heat pump, cylinder and associated equipment.

  6. Step 06

    Commissioning & Certification

    We thoroughly test and commission the system, ensuring it operates efficiently and safely. All certification and handover documentation is provided.

  7. Step 07

    Ongoing Support

    We’re here long after installation, offering aftercare, technical support and guidance to help you get the most from your system.

Heat pumps for your home

Why it makes sense

A well-designed heat pump can heat your whole home and your hot water using far less energy than a traditional boiler, which often means lower running costs and cleaner, greener heating. Better still, many homeowners can claim up to £9,000 through the Boiler Upgrade Scheme, significantly reducing the upfront cost. Combined with 0% VAT on qualifying residential installations, this can make switching to a heat pump considerably more affordable, while providing steady, comfortable warmth throughout the year.

Lower CO2 than a gas boiler
70%
More efficient than a traditional boiler
4x
Typical installation time
5–14 days
Historic college student accommodation in Cambridge, seen through a sash window

Case study Cambridge · Air source heat pumps

Low-carbon heating for Cambridge student accommodation

Replacing ageing gas heating across historic student accommodation with air source heat pumps, while protecting the character of the buildings.

Installation
6 weeks
Buildings
Multiple
Location
Cambridge

Heat pumps for homes and businesses

Heat pumps aren’t just for houses. For businesses across Cambridgeshire, a well-planned system can lower heating costs, cut reliance on gas or oil and support your sustainability goals, keeping your premises comfortable while disruption is carefully planned and managed.

We design commercial systems around how your building actually uses heat, so the setup matches your day-to-day demand. Whether you’re heating an office, workshop or retail space, we’ll provide clear guidance on cost, efficiency and likely payback before you commit.

Renovated Boxworth home with in-roof solar panels and a landscaped garden

Heating and cooling from one system

Selected air-to-water heat pumps can provide cooling as well as heating, helping you maintain a comfortable home throughout the year.

Cooling can be delivered through suitable fan-coil units, underfloor systems or a separate cooling circuit. The right approach depends on your property, existing heating system and the level of cooling you expect.

If cooling is important to you, let us know during the design stage. We can assess the available options and ensure the system, controls and pipework are planned appropriately from the outset.

How much does a heat pump cost to install?

Every property is different, so the exact cost will depend on the size of your home and its heating needs. As a general guide, a typical air-source heat pump and hot-water cylinder installation starts from around £7,000–£8,000 after eligible Boiler Upgrade Scheme funding. The final cost depends on the property and any heating-system upgrades required. We’ll survey your property and provide a clear, itemised quote upfront, including an honest view on running costs and any grants you may qualify for.

Frequently asked questions

Still unsure? Call 01223 646 462 or email gogreener@infiniteheating.com. We are here to help.

Is funding available for a heat pump?
Yes. The Boiler Upgrade Scheme currently provides grants towards eligible heat-pump installations in England and Wales.

Eligible properties replacing mains-gas heating may receive £7,500. Off-gas-grid properties replacing oil or LPG heating may receive £9,000, with the increased amount currently available until 31 March 2027.

We’ll explain the eligibility requirements and manage the application process where applicable.
How much does a heat pump installation cost?
As a guide, a typical air-source heat pump and hot-water cylinder installation starts from around £7,000–£8,000 after eligible grant funding.

The final cost depends on the property, heating requirements and any radiator, pipework or electrical upgrades needed. We’ll provide a clear, itemised quotation following the survey and design process.
Will my radiators, pipework or hot-water cylinder need replacing?
Some changes may be required, but every property is different.

Heat pumps work most efficiently at lower flow temperatures, so certain radiators may need replacing with larger models. Replacing around five standard radiators typically adds approximately £2,000, depending on their size, location and associated pipework.

Existing pipework can often be retained if it is appropriately sized and in good condition. A heat-pump-compatible hot-water cylinder is usually recommended to achieve effective heat transfer and reliable hot water.
Do heat pumps work during cold winters?
Yes. Heat pumps are designed to provide heating and hot water throughout the UK winter, including during freezing temperatures.

Correct system sizing and design are essential, which is why we assess the property’s heat loss and heating requirements before recommending a system.
Are heat pumps noisy?
Modern heat pumps are generally much quieter than people expect. Noise levels vary between models and operating conditions, so we carefully consider the proposed location during the survey.

We’ll also ensure that the installation meets the relevant planning and noise requirements.
How long does installation take?
Most domestic heat-pump installations take approximately five working days, particularly where only limited heating-system upgrades are needed.

More involved projects may take between five and ten working days, depending on radiator changes, pipework, electrical work and other requirements. We’ll provide a realistic programme before work begins.
Do I need planning permission for a heat pump?
Most domestic installations fall under permitted-development rights and do not require a planning application.

Different requirements may apply to listed buildings, conservation areas and installations that do not meet the relevant size, location or noise conditions. We’ll advise you during the survey.
Can a heat pump reduce my energy bills?
A correctly designed heat pump may reduce heating costs compared with oil, LPG and older or inefficient heating systems.

Actual savings depend on the property, insulation, system design, electricity tariff and how the heating is used. We’ll provide realistic guidance based on your existing system and requirements.
How long does a heat pump last, and what maintenance does it need?
A properly installed and maintained heat pump can typically last 15–20 years or longer.

We recommend annual servicing to help maintain efficiency, identify developing issues and meet relevant warranty requirements. Visit Infinite Care to learn more about servicing and maintenance.
Can an air-to-water heat pump provide cooling?
Yes. Selected air-to-water heat pumps can circulate cooled water through compatible emitters, providing heating in winter and cooling during warmer weather.

The heat pump, controls and distribution system must be designed for cooling from the outset.
Is heat-pump cooling the same as air conditioning?
Not always. Air-to-water heat pumps can provide gentle comfort cooling throughout a home, while conventional air conditioning generally offers faster, deeper and more targeted cooling.

We’ll explain whether heat-pump cooling, air conditioning or a combination would best match your property and expectations.
What are fan-coil units?
Fan-coil units use a small fan to move air across a heated or cooled water coil. They can provide both heating and cooling from the same air-to-water heat-pump system.

They are available as visible wall-mounted units or concealed systems installed within lofts, ceilings or service spaces.
Can I keep my existing radiators and add cooling?
In many cases, yes. Existing radiators can continue providing heating while separate fan-coil units deliver cooling to selected rooms.

The most suitable arrangement will depend on the existing system, available installation space and the level of cooling required.
Is heat-pump cooling suitable for my home?
This depends on your current heating system, available space and cooling expectations.

If cooling is important to you, let us know during the initial design stage. We can assess the options and explain whether comfort cooling, deeper cooling or conventional air conditioning would be most suitable.

Get a custom quote for your property

Tell us about your property and what you would like to achieve. We’ll come back with a clear, itemised quotation with no obligation.

Prefer to talk? 01223 646 462Monday to Friday, 8am to 5pm

Stone farmhouse in Cambridgeshire with roof-mounted solar panels and a landscaped garden